Cabinet Materials & Door Questions

Not inherently. Dense, furniture-grade particleboard in a thick, fully-finished ¾″ panel makes a solid, long-lasting box. Judge the thickness and edge finish, not just the material name.

Plywood holds screws best and resists moisture, so it is the premium choice (and worth it for sink bases). Good particleboard is perfectly durable in a thick, sealed panel — what matters most is thickness and edge banding.

Framed forgives out-of-square walls a bit more; frameless (European) gives bigger drawers, full access and a seamless modern face. Flip cabinets are frameless, which is why the install is fussy about a truly level box.

Yes, when the boxes are installed level. Frameless doors are set entirely by three-way clip hinges, so a level install matters — but the hinges themselves adjust easily, and modern soft-close clip hinges hold their setting well. A small turn of the side screw now and then keeps the gaps sharp.

Taste, not durability. Slab reads modern and is easiest to clean; shaker is the transitional default that suits most homes. Choose style for looks, finish for wear.

Different, not better. Thermofoil is a seamless, wipeable sealed skin that dislikes high heat; painted MDF gives the crispest colour and touches up if chipped.

Yes — the upgrade you feel every day for little money, and it protects doors and boxes from years of slamming. Flip cabinets include concealed soft-close hinges as standard.

Two cabinet colours in one kitchen — usually lighter uppers over a darker base or a contrasting island. It adds depth for little or no extra cost on stock colours. For a small kitchen or rental, a single warm neutral can be the safer, easier-to-update choice.

For most DIY kitchens, quartz — it never needs sealing, is very durable and colour-consistent, and it is what Flip’s own countertops are made of. Granite is natural and heat-tolerant but wants yearly sealing; laminate and butcher block are budget and warm options.

A panel-ready dishwasher has a blank front built to take a door panel, so the machine disappears into the run. That panel is made to the appliance maker’s template, and Flip does not make panels for appliance doors — choose the model early and source its panel separately. A dishwasher end panel closes the open side of a dishwasher at the end of a run, where there is no cabinet beside it: in a Flip kitchen that is a ¾″ base end panel (MBEP) or the 3″-wide DWR3, ordered in your door colour with the cabinets. Fix one or two strips across the top of the opening, from the panel to the cabinet on the other side: they hold the panel in place and give the dishwasher’s mounting brackets something to screw into. Measure the opening height to the underside of the strips.

Boxes arrive with their working hardware — European concealed hinges with their mounting plates, undermount soft-close runners for the drawers, shelf pins, adjustable levelling feet and the fittings that put the box together (cam locks on plywood, screws on particleboard). Handles and knobs are the deliberate exception: pull style, finish and hole spacing are a design decision made alongside the door colour, and they are the very last thing to go on. Not in the box either: the screws that join one cabinet to the next and the screws that fix them to the wall — those are yours to buy. If you have Flip assemble the boxes — an extra-cost option to ask for with your quote — only the box itself is built; the legs and hardware come packed in a box for you to fit.

About 1½″ past the face of the base cabinet — that is a 25½″ deep top on a 24″ box, which is why fabricators quote 25½ or 26″. It covers the door faces and lets drips fall clear of them. On the seating side of an island you want 15″ of knee room at a 36″ counter (12″ only at a 42″ bar). A ¾″ quartz top carries 6–10″ unsupported, never more than half the depth of the cabinet below, so past 10″ you need brackets or a support panel underneath — your fabricator has the final say.

You can, but ask first whether you need to. Cabinets come in 3″ width steps and a filler closes anything up to about 3″ — so cutting is for the case a filler genuinely cannot solve. Reducing a base cabinet’s height is the easy one. Reducing its width means cutting the box and the back and the door, then re-boring the hinge cups — possible with a table saw and patience, but you are now a cabinetmaker. Whichever you cut: score the line, tape both faces and use a fine-tooth blade, or melamine will chip along the cut.

Sides, shelves and bottom are ¾″ (18 mm) plywood or particleboard with creamy-white melamine on both faces and matching PVC edge banding; drawer bottoms and backs are ⅝″ (16 mm) in the same build.

No. The back is only ⅛–¼″ thick, slotted into grooves in the box. The load goes through the three solid ¾″ rails across the back of every wall cabinet — top, middle and bottom — so screw through those into a stud.

A 0.45 mm PET sheet laminated to an 18 mm MDF core, with a melamine back and 1.3 mm colour-matched PVC edge banding. A real sheet rather than a printed skin, which is where the gloss and the moisture resistance come from.

It is the North-American limit on formaldehyde emissions from composite wood panels. Both our door cores are certified to it. It is an indoor-air standard, not a strength one.

Different constructions, not just different levels. Classic = melamine colour and texture on an 18 mm particleboard core. Delight holds Glossy White — a 0.45 mm PET sheet on MDF — plus the shaker styles. Grand is the widest palette: matte and gloss solids plus six wood textures. The three glass doors are listed with Grand and go on the individual wall cabinets you choose, not on the whole kitchen.

The sides are steel — the metal side and the undermount runner are one part — and the bottom and back are 16 mm melamine-faced panels. That is why a full-extension drawer takes real weight without sagging.

Yes — and it also wipes clean faster than anything else in the kitchen, which is the trade. A high-gloss front shows fingerprints, dust and every smear, so it rewards a household that wipes down. A textured or matte surface hides handling far better; mid-tones hide it best of all, and very dark matte shows dust the way gloss shows fingers.

With a factory-laminated door, very closely — the colour is a manufactured sheet rather than a sprayed batch, so it stays far steadier between doors and between orders. That is one of the quiet advantages of laminate over paint, where a touch-up two years on is genuinely difficult to match. Note the exact colour code on your plan and keep it; if that colour is ever discontinued, talk to your Flip sales rep before you order.

Any of them, if you match the finish to the household. Textured wood-look doors are the most forgiving of handling; gloss is the easiest to actually clean; painted surfaces look the best and are the ones that chip. The genuine enemy of every finish is the same — standing water at an edge and steam from a dishwasher opened too early.

They lighten a run of uppers and break up a wall of solid doors, at the price of having to keep that cabinet tidy. Use them above the counter, not below, and give them the things you are happy to look at. Flip’s three — White Shaker Glass, Grey Shaker Glass and Black Aluminum — are listed with the Grand colours, and you put them only on the wall cabinets you pick, in the sizes they are made in.

More than most people load it with, but not unlimited. A wide span of board carries dishes happily and starts to bow under a stack of heavy appliances or tinned goods left in the middle of the shelf for years. Two habits prevent it: put the weight near the ends where the pins support it, and add an extra shelf rather than piling one high. A bowed shelf can often be flipped and will straighten back over time.

The same melamine that faces the outside of the panel — the boards are laminated on both faces, with matching PVC banding on the edges. There is no raw board inside to absorb a spill, and nothing to paint or line. Wipe it and it is done.

You can paint melamine if you commit to the prep: degrease it, scuff-sand the sheen, use a bonding primer made for laminate, and finish in thin coats. Skip any of those and it peels at the first fingernail. Thermofoil is a poor candidate — the vinyl skin can lift with heat and paint will not fix an edge that has already let go. Honestly, replacement doors on the same boxes usually beat a paint job.

No — mixing metals is normal and often looks more considered than a perfect match. Keep it deliberate: pick one finish for the cabinet hardware and let the faucet and lighting be a second, consistent metal. If you want them all identical, buy them together, because “brushed nickel” from two suppliers rarely is.

Rarely, and when it does the cause is almost always steam. The classic case is a dishwasher opened at the end of the cycle, sending a plume straight up onto the edge of the door above it. Let the machine cool before you open it, wipe standing water off edges, and the banding will outlast your taste in colours.